|
Ure-K® Spray Coatings
|
- Thermal Barrier Coating for Polyurethane Foam
- Thermal Insulation
- Acoustic Enhancement
|
 |
| |
Thermal Barrier
Ure-K
is a thermal barrier approved as a building interior insulation to
delay the ignition and reduce the surface burning rate of low melting,
combustible rigid spray-on polyurethane foam. Ure-K
may be sprayed over foam in existing building or it can be used as a
protective coating over foam in new construciton projects as a
combination system. |
| |
Thermal Insulation
Ure-K applied over polyurethane provides additional thermal
resistance which will meet the stringent "R" values required for today's
energy conservation needs. The combination of Ure-K
and polyurethane has the highest efficientcy of all available
insulations. |
| |
Noise Control
Ure-K is a monolithic coating which will provide a highly
efficient sound absorption surface in either new or existing
building. This is an important benefit in controlling noise
levels to meet OSHA and other requirements. |
| |
Installation
Ure-K fibers and liquid binder are applied to the surfaces
simultaneously in separate streams through equipment especially
engineered to control the material density and adhesive/fiber
mixture. The Ure-K binder provides excellent adhesion
to all types of polyurethane foam insulations. |
| |
Ure-K & Urethane Uses
The combination of Ure-K Spray Coating and urethane can be
used in a variety of applications:
Freezers
Coolers
Refrigerated warehouses
Metal buildings
Underground parking decks
Projects requiring high R-values
Curtin wall high rise buildings
Tilt-up, precast & poured-in-place concrete construction
Energy conservation |
| |
Limitations
Ure-K should not be applied in areas where there is prolonged
exposure to water, nor necessity for requiring a washable surface or
where contaminants such as dust, lint or oil mist exist. If
flammable contaminants collect on the Ure-K surface, it should be
removed or oversprayed with a fire retardant
solution. Ure-K should not be used in areas where
temperatures exceed 150°F, at the Ure-K surface, for long
durations. Do not apply Ure-K in areas where
mechanical damage will result, unless it is protected. |
| |
|
Ure-K® Spray Coating Product
Details
|
